You are viewing the Split Screen Van Club forum archive.
The forum archive is read-only.Unfortunately in 2021 the Split Screen Van Club forum suffered a ransomware attack and lots of the forum data was lost.
What threads that have been recovered are now searchable on this site. Some threads may be incomplete and some images are still being recovered.
Forum archive search
Forum Archive > Interiors/Conversions
Front seat harnesses and Devon interiors
Re: Front seat harnesses and Devon interiors
by type21f » Sat Oct 24, 2015 10:03 am
Found this discussion...about Bally bus and harnesses...
Did you resolve the bench seat harness Devon interior in you bus Dave...
G
Did you resolve the bench seat harness Devon interior in you bus Dave...
G
type21f
SSVC Member
Posts: 10385
Joined: Tue May 29, 2007 12:55 pm
Re: Front seat harnesses and Devon interiors
by Bally » Sun Oct 25, 2015 9:58 am
I'm working on it Graham. I have the front harnesses in but they need fettling.
I am currently fitting the ply floor in the back, then I can fit the floor tiles, then try out the Devon interior - at this point I'll need to work out how to do the seat belts - I have anchor points installed just not sure how to get through the wood with the belts...
Must crack on with that floor now.
Dave
I am currently fitting the ply floor in the back, then I can fit the floor tiles, then try out the Devon interior - at this point I'll need to work out how to do the seat belts - I have anchor points installed just not sure how to get through the wood with the belts...
Must crack on with that floor now.
Dave
Bally
Registered user
Posts: 718
Joined: Thu Mar 09, 2006 3:55 pm
Re: Front seat harnesses and Devon interiors
by type21f » Sun Oct 25, 2015 10:04 am
Have a look at my Peebles thread...
viewtopic.php?f=8&t=74138&hilit=peebles&start=225
I cannot get the link right but on page 15 on here...
Not the same number on tapatalk..
I cut holes in the seat base frame with a drill and then fitted an escutcheon round the hole so the belt pulled on the mount below. From quickfitsbs. ..
I made a flying spur metal extension by the cooker.
All has worked well.
G
viewtopic.php?f=8&t=74138&hilit=peebles&start=225
I cannot get the link right but on page 15 on here...
Not the same number on tapatalk..
I cut holes in the seat base frame with a drill and then fitted an escutcheon round the hole so the belt pulled on the mount below. From quickfitsbs. ..
I made a flying spur metal extension by the cooker.
All has worked well.
G
type21f
SSVC Member
Posts: 10385
Joined: Tue May 29, 2007 12:55 pm