You are viewing the Split Screen Van Club forum archive.
The forum archive is read-only.Unfortunately in 2021 the Split Screen Van Club forum suffered a ransomware attack and lots of the forum data was lost.
What threads that have been recovered are now searchable on this site. Some threads may be incomplete and some images are still being recovered.
Forum archive search
Forum Archive > Technical
1
Front bumper gap?
Front bumper gap?
by oilyragg » Mon Apr 06, 2015 4:15 pm
Fitted the lower front panel and the nose today
and tried on the front bumper which fitted fine in the chassis holes but there is about a 40mm gap between the front panel and the bumper and almost touching at the sides, is this right or should it be tighter to the front?
and tried on the front bumper which fitted fine in the chassis holes but there is about a 40mm gap between the front panel and the bumper and almost touching at the sides, is this right or should it be tighter to the front?
oilyragg
Registered user
Posts: 233
Joined: Sat May 31, 2014 10:10 am
Re: Front bumper gap?
by Archie3781 » Mon Apr 06, 2015 5:23 pm
That does look a bit proud, but not by much at all, it's mostly how you want it, if your all the way in on your slots, and don't like it, you've got some work, not much though, also, should be snug to tides, mines pretty close too.
Archie3781
SSVC Member
Posts: 143
Joined: Tue Jun 17, 2014 6:59 pm
Re: Front bumper gap?
by oilyragg » Mon Apr 06, 2015 8:47 pm
Ok thanks Archie.
oilyragg
Registered user
Posts: 233
Joined: Sat May 31, 2014 10:10 am
1