You are viewing the Split Screen Van Club forum archive.
The forum archive is read-only.Unfortunately in 2021 the Split Screen Van Club forum suffered a ransomware attack and lots of the forum data was lost.
What threads that have been recovered are now searchable on this site. Some threads may be incomplete and some images are still being recovered.
Forum archive search
Forum Archive > Technical
1
How to set your gear shifter.
How to set your gear shifter.
by RPATTZ » Sat Aug 08, 2015 9:33 pm
Hi guys, I've just rebuilt my gear shifter which was fully standard before strip down. On the rebuild I've added a quick shift device which sits o top of the selector plate. I got all gears but they are not clean in selection.
Is there a way of setting this up to gain a clean gear selection.
Cheers,
Richard.
Is there a way of setting this up to gain a clean gear selection.
Cheers,
Richard.
RPATTZ
Registered user
Posts: 70
Joined: Sat May 18, 2013 2:38 pm
Re: How to set your gear shifter.
by ted698 » Mon Aug 10, 2015 12:07 pm
ted698
SSVC Member
Posts: 794
Joined: Mon May 13, 2013 6:12 pm
Re: How to set your gear shifter.
by RPATTZ » Tue Sep 08, 2015 11:00 am
Finally got round to try and get this clean gear selection and I think I've totally messed up now. Before I adjusted the plate position I had all four gears in selection a little sticky in selection but there. Adjusted the plate tried the gears again and it's stuck in a position which I can't move.
I hope it's nothing wrong in the transmission end Cap end and its just stuck. I can rotate the wheels by hand so I'm guessing it's not stuck in gear but just jammed.
Anyone got any ideas,
Richard.
I hope it's nothing wrong in the transmission end Cap end and its just stuck. I can rotate the wheels by hand so I'm guessing it's not stuck in gear but just jammed.
Anyone got any ideas,
Richard.
RPATTZ
Registered user
Posts: 70
Joined: Sat May 18, 2013 2:38 pm
1