You are viewing the Split Screen Van Club forum archive.
The forum archive is read-only.Unfortunately in 2021 the Split Screen Van Club forum suffered a ransomware attack and lots of the forum data was lost.
What threads that have been recovered are now searchable on this site. Some threads may be incomplete and some images are still being recovered.
Forum archive search
Forum Archive > Technical
1
Fan belt
Fan belt
by philsparks » Fri Jun 16, 2017 9:23 am
Hi what's is the correct size belt for my 1641 twin port with dynamo? Is it 10mm x 900mm and should it be toothed? Thanks phil
Sent from my SM-J320FN using Tapatalk
Sent from my SM-J320FN using Tapatalk
philsparks
SSVC Member
Posts: 332
Joined: Wed May 21, 2014 7:55 pm
Re: Fan belt
by readyboy61 » Fri Jun 16, 2017 11:08 am
readyboy61
SSVC Member
Posts: 2856
Joined: Sat Jan 26, 2008 8:36 pm
Re: Fan belt
by philsparks » Fri Jun 16, 2017 11:10 am
Thanks for your help that looks like the business is will order a couple. Thanks Phil
Sent from my SM-J320FN using Tapatalk
Sent from my SM-J320FN using Tapatalk
philsparks
SSVC Member
Posts: 332
Joined: Wed May 21, 2014 7:55 pm
Re: Fan belt
by Doka Dave » Fri Jun 16, 2017 11:30 am
WHS!
Optibelt all the way.
Be careful though as different pulley wheel sizes and alternator/dynamo sizes can affect things quite a bit.
On my bay an 888mm belt is best and on my split a 900 or 905 fits better (can't remember which) and they are both the same on paper lol
Either way, Optibelt do a variety of sizes so should be fine and the quality is very good as it's a V belt.
Good luck!
DD
Doka Dave
SSVC Member
Posts: 517
Joined: Fri Mar 04, 2011 11:49 am
Re: Fan belt
by ted698 » Fri Jun 16, 2017 12:38 pm
Stock factory belt for Dynamo was 9.5 x 905 (pt no: 111 903 137D) - interesting that the Optibelt sold by M7 above is 11.5mm thickness instead of 9.5 x 912 - so must ride much higher in the pulleys - may have to try one of those as I'm running no shims currently to keep my belt tight enough and that's with a C&C 906 belt.....
ted698
SSVC Member
Posts: 1449
Joined: Mon May 13, 2013 6:12 pm
1