Now coated with a coat of black top coat. The outer belly pans will be given the same treatment on the inner faces and then be welded on.

Outer Belly Pans plug welded in place..
Note the holes for the Devon step legs through the belly pans.....

The rear face of the Devon step frame is shaped to match the chassis which determines the leg position.
G

type21f wrote:Outer Belly Pans plug welded in place...............................................

G

Duodecagon rotisserie style roller in use yet again..
Design idea stolen with pride from the web and modified and fabricated by Matt Mounted onto wheeled supports to be rolled into place...
in the shop for welding or in the paint booth as required..
Such a good investment..
G

Outer bellypans plug welds linished... seam sealed...
Rivnuts plugged..
Holes drilled for rear of Devon step..
gravitexed all over...



Looking very good.
Soon be into colour stages..

Then the big decision.

Play the cards I was dealt..
SWR and BG....as a microbus.. with two tone VW interior panels..I have nearly 3 sets..

Like this...



or SWR all over as a kombi with Oak veneer interior panels.. I have a set.
Like this...







But in SWR...without the US bumpers..
Like this this..

To see if anyone is reading..
What do you think..?
G

Looks great Graham, it's really coming along now.

Glenn Yale wrote:Looks great Graham, it's really coming along now.

Cheers!
It will live again as a Devonette..

Think I have yet again convinced myself..
Dave's work on NikC bus ppg paint
Love the white walls


Bernardsamba 63 samba Reggie

Oops becoming a repeat of page 16..
My favourite picture ...of ppg SWR n BG applied by Dave..

Coatesy's 64 WT....that is a very rare Devon in the making.

I'm popping round later to eat my dinner off your underside.

Lovely looking work

JonnyCJ wrote:I'm popping round later to eat my dinner off your underside.

Lovely looking work

Cheers..
Getting there...
Dave n Matt are really meticulous..
I get a daily fix when they are working on Sherry..
Soon will be time to fund the ppg no doubt..
Beige grey inside n dash
SWR on lower half n undies..
Oh it will look nice..
Got Kevin Jackson making some of my missing interior pieces..
He is busy doing a new interior and refurbishing pieces though so he is making the odd pieces for others and me in between..
Going to look good..

You’re lucky to have quality craftsmanship so close !

Well.. I did work in the car industry and served a graduate apprenticeship of sorts. Ended up/ started out as a body detail supervisor... eventually had a team of skilled sheet metal workers/ rectifiers reporting to me doing line side repairs etc. They could DO anything with metal so I did at least get trained in knowing correct practices and appreciation of skills when I saw them. I am a planner project manager commercial project engineer... so I scheme..
SplitbusKev was the guy who introduced me to Dave..
Dave is an all out thoroughly nice guy.. and Matt is a delight
Working with them is so rewarding..
G

type21f wrote: ↑Sat Nov 18, 2017 3:13 pm To see if anyone is reading..
What do you think..?
G

It's looking very good Graham. I like the red one but you've already got the type21f. I bet you leave it as stock colours

yes...