superb stuff Mark !

is the engine lid for me?

..Mark, you NEVER cease to amaze me fellah!

..we are truly , NOT WORTHY!

Perhaps, along with my pre-arranged tutorial elsewhere, i could come along sometime, & just watch you work?


..( Clinton, i may have a spare lid, if you need one.. )

As normal top work going on down the unit
Tim had a little look at your panel today as i was collecting a friends van from having some welding done quite a project you have there.
Ben

Top Work Mark...

Eagerly watching this thread

67ben wrote:As normal top work going on down the unit
Tim had a little look at your panel today as i was collecting a friends van from having some welding done quite a project you have there.
Ben

..that's disturbing, Ben , as it was in a secure lock up last time i saw/heard about it, not at Paul's work...

really nice Mark

last week the Queen Elisabeth said to me that Mark was in contact with the government. he wants to rent a submarine for his next project
Right ???

Nice little write up and photo's in Camper & Bus mag Mark

Is there? A lad on here contacted me about it, did promise me a free copy -ah well . I will have a look for the mag next time im out. Hope it doesnt mention it ever getting finished or started for that matter .
There is no new news on the van - other than i have now visited it since picking it up and the rear engine lid has fallen off.

..hope the front one's still attached, Mark..

Option of being dragged round town Christmas shopping or escaping to get something else done - um -easy decision...

So After getting drivers lower B panels made up for Clintons bus and having a huge tidy up, i decided later this afternoon to do a bit for me and make myself a rear bulkhead.
I had to make it in 4 parts as i dont have the kit to form it in one.(not sure why the two middle bits ended up those sizes )
Some pics, just tacked together for now....



cheers

52panelvan wrote:Option of being dragged round town Christmas shopping or escaping to get something else done - um -easy decision...

You were given an option...?! Thats not one of those trick questions is it? Hope you don't regret it later Mark!

I decided on the way home while i was on a roll to make a rear wheel arch, so i made up some templates and used the heated workshop to make this tonight...
As usual tacked together and not finished (i had to make it in sections again), it wouldnt have taken me very long except that flat bit on the arch tricked me a bit as i lost the curve when i put it in, so i had to stretch the steel(read beat with hammer) to get the curve back . I havnt put the front wheel arch lower closing panel on as i didnt have a peice of steel long enough so i will make it and add it later.





cheers

mark

..you are one clever ************* guy! ...ever thought of doing this Profesionally?

cheers

mark[/quote]



fantastic work fantastic skills...you sir are a genius....keep it coming....brilliant