mmmm Rand ars

Close ???

Nice thread bud, looking good, how did you get the big dent on the drivers side out, I've got a similar one too!!

Matt smith did the metal work - a lot of metal massaging is what he said to me


Got this pedal to the metal in

211vanman wrote:Close ???

So it was a 'slot' 'mag' joke? ...but with a calendar instead of a mag?

Good job the van's top quality eh...

And maybe use a bay filler neck


Or use a concept racing filler neck
http://www.conceptracing.co.uk/products ... ller-neck/[/quote]

If you do use away filler neck DON'T join it with silicone hose. It will rot like a pear & you'll have major problems!

Maybe I've missed something in the thread but thought I'd point it out from experience.

I found it difficult to source fuel grade hose in bay neck diameter - most places don't sell the right length but a bit of research lead me to Burton, a 'Ford' specialist who sell it by the inch.

Gill.

Thx fir heads up -cheers

nice rims and really nice beam too!

Sweet Rides wrote:Daz, in the pic it looks like you are using a plastic inline filter? If so I would recommend swapping out for an alloy one as in my experience the plastic ones are very unreliable...

link to decent quality alloy one for £5 below :

http://www.ebay.co.uk/itm/Warrior-Motor ... 20eedaa709

Thx for heads up on that spence - appreciated all sorted

I'll put a couple of those filters on my shopping list
What's happening on the inside Daz, seats or interior

Gonna ask you to build me a camping interior !!

Gonna put seats in and the back seat will be a rusty lee rock n roll bed in .

Got the seat belts , in the hitop I used fixed belts but went for more comfortable Inertia belts this time

Got the nose cone off and it was a boy sloppy

A bit worn


Got the og style bushes and the new style ( beetle ) bush with the rubber end - so used one old style and the new type at the end



Out with the old in with the new

That's the way to do it Daz

My front bumper over rider has took a bashing - so with a big hammer bashing and a big press we played hit the over rider



A little twisted !!!!





Now with the press - bang bang



The outcome - not perfect but a bit better ??





And still retaining a bit of pat N tina !!
The guy who's press I borrowed didn't understand why I want painting it????

The engine lid hinges were shot so changed them to new stainless ones from bj1 on ssvc
Got them drilled out and in with the new ones





Got the welder out and did the bracket on the front bumper